To Next PageTo Next Page
Need help?Do you have a question about the FujiFilm FCR XC-1 and is the answer not in the manual?
General| Detector Type | Imaging Plate (IP) |
|---|---|
| Type | Computed Radiography (CR) |
| Image Size | Up to 35 x 43 cm |
| Connectivity | DICOM |
| Gradation | 12-bit (4096 gray levels) |
| Grayscale | 12-bit |
| Power Requirements | AC100-240V ±10% 50/60Hz |
| Image Plate Size | 35 x 43 cm |
General warnings and cautions to observe for safe operation of the FCR XC-1.
Usage precautions for the equipment to ensure correct operation and prevent hazards.
Details on laser handling safety and equipment classification for electrical shock and water protection.
Information on electromagnetic emissions and immunity compliance for medical devices.
Specific precautions to follow when operating the FCR XC-1 unit to ensure safety and proper function.
Diagrams showing the positions of various labels affixed to the FCR XC-1 equipment.
Highlights the key features and capabilities of the FCR XC-1 image reader system.
Identifies and describes the main unit components and their functions.
Details the display screen, buttons, and lamps on the FCR XC-1 operation panel.
Explains the different display fields on the FCR XC-1, including title, message, and status areas.
Illustrates the processing status bar and corresponding rack LED indications during cassette reading.
Procedures for preparing the system, including performing image erasure.
Steps for starting up, shutting down, and reading images using the CR Console.
Instructions for powering the FCR XC-1 main unit on and off.
Guide on accessing and exiting the system's utility functions.
Procedure for cleaning the internal scanner components of the FCR XC-1.
Introduction to troubleshooting, listing common problems and their corresponding solution pages.
Checks and solutions if the FCR XC-1 fails to power on.
Troubleshooting steps when the FCR XC-1 cannot be shut down normally.
Explanation of error codes and messages displayed on the FCR XC-1 screen.
Methods to fix streaking issues in scanned images, including scanner and IP cleaning.
Guidance on performing daily checks and maintenance for optimal equipment operation.
Instructions for cleaning the cassette set unit, including precautions.
Procedure for cleaning air filters, louvers, and ports to maintain ventilation.
A checklist for users to record verification and cleaning activities.
Technical specifications including power, environmental conditions, and compatible IPs/cassettes.
Data on processing capacity, feed/load times, and image display/print times.
List of safety standards and regulations that the equipment complies with.
Physical dimensions, views, and weight of the FCR XC-1 unit.
Procedure for performing image erasure on Imaging Plates (IPs).
Guidelines for proper handling, cleaning, and storage of Imaging Plates.
Description of information annotated on radiographic films.
List of anatomical regions, applicable menus, and display parameters for image processing.
Details on FNC parameters and their effect on image quality.
General precautions for X-ray exposure, including grid usage.
Specific precautions for Auto, Semi-Auto, Semi-X, and Fix modes of exposure.
