BL00542-200(1)
E
Camera Controls
F650
MENU
W
DISP/BACK
T
/OK
Shutter button
Mode dial
Lens (lens cover)
POWER button
Flash
Self-timer lamp
Terminal cove
A/V OUT (Audio/Visual
output) socke
USB socke
DC IN 5V socke
Microphone
Indicator lamp
4-direction
(nopq) button
LCD monitor
Speaker
Tripod mount
W (Wide zoom) button
T (Tele zoom) button
Photo mode (p) button
Strap mount
MENU/OK button
DISP (Display)/BACK button
Battery cover
xD-Picture Card slot
Battery compartment
Battery release catch
(Playback) button
FPT/Y-608104
Picture Taking
Refer to Owner’s Manual for more detailed instructions
C. Setting up the Camera
A. Charging the Battery
Plug the Battery Charger BC-40
(included) into the power outlet
using the connection cord.
Press POWER button down fully to turn
the camera on.
1.
“DATE/TIME NOT SET” message
appears when turning the camera on.
2.
DATE/TIME NOT SET
SET
NO
Press MENU/OK to set the date and
time.
3.
D. Taking Pictures
Still images that can be viewed on FinePix F650
You can use this camera to view still images recorded on FinePix F650
or still images (excluding some uncompressed images) recorded on a
FUJIFILM digital camera that supports xD-Picture Card.
Press POWER button down fully to turn
the camera on.
Press the shutter button down halfway to
adjust the focus.
You can select your preferred date
format.
Press the shutter button down fully to
take a picture. The camera makes a
“Click” sound and takes the picture.
FinePix F650 has internal memory that can store images without
xD-Picture Card. Use an xD-Picture Card (sold separately) when
recording a large number of images.
Press p or q to select Year, Month,
Day, Hour, or Minute. Press n or o to
correct the setting.
✽ Refer to the Owner’s Manual for
“Turning On and Off”.
4.
1.
3.
4.
Halfway pressed
Fully pressed
2008
2007
2005
2004
YY .MM .DD
2006
DATE/TIME
1 . 1
12:00
AM
SET
CANCEL
E. Viewing the Images
Press w.
Press p or q to move through your
images.
2.
1.
Double
beep
Click
5.
Set the Mode dial to q.
2.
1.
O
PEN
W
D
IS
P
/
BA
C
K
T
D
ISP/B
A
CK
Battery release catch
Indicators
B. Loading the Battery
Hold the battery so that the indicators are aligned. Push the battery
release catch aside while loading the battery. Check that the battery is
firmly held in place.
Load the battery into the Battery
Charger BC-40 correctly as
indicated by the polarity icon to
start charging. Charging ends
after about 90 minutes and the
charging lamp turns off. Unplug
the battery charger from the
power outlet when it is not in use.
2.
Charging lamp
1AG6P1P3048--
To Next Page
General
