FGS-305108-FG
BL00306-200
(
1
)
E
A. Loading the batteries
1.Check that the camera is
turned off (indicator lamp
goes off) before opening
the battery cover.
1.Set the Power switch to
“
q” and set the Mode dial
to “
B”.
2.Press the Shutter button
down halfway to adjust the
focus.
3.Press the Shutter button
down fully to take a picture.
The camera makes a
“Click” sound and takes the
picture.
2.Load the batteries correctly
as indicated by the polarity
icons.
1.Align the gold marking on
the xD-Picture Card slot with
the gold contact area on the
xD-Picture Card™ and
then push the card firmly all
the way into the slot.
Push the Microdrive firmly
all the way into the
Microdrive slot.
Close the slot cover.
B. Setting up the camera
1
2.Set the Power switch to
“
q”.
✽
A confirmation screen
appears.
Press the “MENU/OK”
button to set the date and
time.
✽
Refer to owner’s manual
for date/time setup.
1
2
C. Taking pictures
3
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix S7000
You can use this camera to view still images recorded on the FinePix
S7000 or still images (excluding some uncompressed images)
recorded on a FUJIFILM digital camera that supports xD-Picture
Card or Microdrive.
To Next Page
Need help?
General
