FujiFilm FinePix S1800 User Manual

DIGITAL CAMERA
Confidential: FUJIFILM Service Center Use Only
FinePix S1800/
S1850/
S1880/
S1900
SERVICE MANUAL
US/EF/E1/EG/EE/CH-model
Ref.No.: ZM00812-103
Printed in Ja
p
an 2010.03
●
THE COMPONENTS IDENTIFIED WITH THE MARK " " ON THE SCHEMATIC DIAGRAM
AND IN THE PARTS LIST ARE CRITICAL FOR SAFETY.
● PLEASE REPLACE ONLY WITH THE COMPONENTS SPECIFIED ON THE SCHEMATIC
DIAGRAM AND IN THE PARTS LIST.
● IF YOU USE PARTS NOT SPECIFIED, IT MAY RESULT IN A FIRE AND AN ELECTRICAL
SHOCK.
●
BECAUSE THIS PRODUCTIS RoHS LEAD-FREE COMPLIANT, USE THE DESIGNATED
AFTER-SELES PARTS AND THE DESIGNATED LEAD-FREE SOLDER WHEN
PERFORMING REPAIRS.
FUJIFILM Cor
p
oration

FujiFilm FinePix S1800 Specifications

General

Sensor Type	CCD
Sensor Size	1/2.3 inch
Effective Pixels	12.2 MP
Optical Zoom	18x
LCD Screen Size	3.0 inch
Viewfinder	Electronic
Video Resolution	1280 x 720 (HD)
Storage Media	SD/SDHC card
Battery Type	4x AA batteries
LCD Screen Resolution	230, 000 dots
Video Recording	Yes
Dimensions	110.2 x 73.4 x 81.4 mm
Weight	337 g (without batteries and memory card)
Focal Length	5.0 - 90.0mm (35mm equivalent: 28 - 504mm)
ISO Sensitivity	64-6400
Shutter Speed	8 sec. to 1/2000 sec.
Aperture Range	F3.1 - F5.6 (Wide), F5.6 - F5.9 (Tele)

Summary

FUJIFILM DIGITAL CAMERA SERVICE MANUAL

Safety Precautions

Essential safety warnings for product handling and repairs.

SAFETY CHECK-OUT

RoHS Lead-Free Compliance

Lead-Free Soldering Guidelines

Best practices for using lead-free solder in repairs.

1. Disassembly

REAR COVER ASSY B

Procedure for removing the rear cover assembly.

BATTERY COVER ASSY B

Procedure for removing the battery cover assembly.

MAIN PWB ASSY

Procedure for removing the main printed circuit board assembly.

2. Schematics

2-1. Cautions

Important cautions when replacing parts.

Overall Connection Diagram

Detailed diagram of overall circuit connections.

3. Adjustments

Adjustment After Part Replacement

List of adjustments required after replacing major parts.

Firmware Download

Procedure for downloading and installing firmware.

OIS Calibration

Procedure for calibrating the Optical Image Stabilization (OIS).

4. Inspection

Inspection and Factory Settings

Detailed procedures for inspection and factory settings.

5. Parts List

Mechanical Block

Exploded view of mechanical parts and their references.

5-3. Electrical Parts

6. Appendix

List of Related Technical Updates Issued

Record of technical updates relevant to the service manual.