Newly-developed Technology Enables
Unprecedented Photo Image Quality
Ref. No. LB-1005ER (SK·10·12·F1079·F9711) Printed in Japan ©2010 FUJIFILM Corporation
Unit: mm
Dimensions
492
850
1,132
282
1,184
727
817
1,155
1,530
375
Model name
Print method
Print capacity
Print resolution
Roll paper
Paper type
Paper supply
Paper loading
Ink cartridges
Back printing
Printer sorter
Foot print
Installation space
Power requirements
Dimensions (W
✕
D
✕
H)
Weight
Power consumption
DL600
Piezoelectric inkjet system
Print size 127
✕ 89 mm to 305 ✕ 1,219 mm (5” ✕ 3.5” to 12” ✕ 48”)
Standard Mode: Approx. 650 print/hr (152
✕ 102 mm, 6” ✕ 4”)
Approx. 240 print/hr (203
✕ 254 mm, 8” ✕ 10”)
High Quality Mode: Approx. 150 print/hr (152
✕ 102 mm, 6” ✕ 4”)
Approx. 60 print/hr (203
✕ 254 mm, 8” ✕ 10”)
Standard Mode 720
✕ 720 dpi, High Quality Mode 1,440 ✕ 1,440 dpi
180 m: 102 mm (4”), 127 mm (5”), 152 mm (6”)
100 m: 203 mm (8”), 210 mm, 254 mm (10”), 305 mm (12”)
2 roll paper feeders (Built-in)
Width: 102 to 203 mm (4” to 8”) [Front] /102 to 305 mm (4” to 12”) [Rear]
Glossy/Luster
5 Colors (C, M, Y, K, LB) of dye based ink (Volume: 700 ml per color)
Two 40-character lines in backside print of information
10 order sorter (Maximum size 210
✕ 305 mm, 8” ✕ 12”)
Approx. 1.48 m
2
(included sorter unit)
Approx. 3.2 m
2
(included sorter unit)
100/120V/ 200-240V (50/60Hz) single-phase two-wire
1,184
✕ 1,530 ✕ 817 mm
Approx. 160 kg (included sorter unit)
Approx. 63 kWh/month (in energy saving mode)
Approx. 89 kWh/month (without energy saving mode)
Note: Specifications are subject to change without notice due to improvements.
Dry Minilab Frontier DL600 Main Specifications
To Next Page
Need help?
General
