Need help?Do you have a question about the FujiFilm SonoSite Edge II and is the answer not in the manual?
General| Battery Life | 2 hours |
|---|---|
| Imaging Modes | 2D, M-Mode, Color Doppler, Power Doppler |
| Operating Temperature | 0°C to 40°C |
| Connectivity | Ethernet, USB |
| Probe Ports | 2 |
| Portability | Portable |
Covers essential electrical safety requirements and precautions.
Provides safety precautions for the system, transducers, and accessories.
Details safety precautions for handling and using the battery pack.
Addresses safety considerations related to patient use and procedures.
Guidance on EMC and potential interference issues.
Declarations related to electromagnetic emissions and immunity.
Details the essential performance requirements for immunity testing.
Provides procedures for diagnosing system and subsystem failures.
Explains system assert codes and how to interpret them.
Steps to identify the cause of system assert codes.
Troubleshooting common errors related to DICOM communication.
Step-by-step instructions for replacing the display assembly.
Instructions for removing and replacing the control panel subassembly.
Procedure for removing the TGC (Transducer Gain Control) assembly.
General steps for disassembling the system for component access.
Procedure for replacing the power supply PCB assembly.
Step-by-step guide for replacing the Main PCBA.
Procedure for replacing the system's midframe.
Instructions for replacing the bottom enclosure of the system.
Tests to assess the quality of 2D ultrasound images.
Procedure to test the accuracy of axial distance measurements.
Procedure to test the accuracy of lateral distance measurements.
Lists part numbers for the Main Printed Circuit Board Assembly.
To Next Page