To Next PageTo Next PageWhat to do if suction valve does not return to the original position in FujiFilm 700?
If the suction valve does not return to its original position in your FujiFilm Medical Equipment, it may be due to solid materials or thick fluids adhering to it, or the valve may be damaged. Detach the suction tube from the suction unit, detach the suction valve, and replace it with a new reprocessed suction valve.
What to do if there is no air/water supply in my FujiFilm 700?
If there is no air/water supply in your FujiFilm Medical Equipment, consider the following: * Check if the air pump in the light source is turned off and select an appropriate level (High, Middle, or Low). * Ensure the air/water valve is not faulty; replace it if needed. * Press the air/water valve firmly. * Make sure the water tank cap is tightly closed. * Verify the water level is not overfilled (should be around 80% of capacity). * Ensure the water tank is filled with sterile water and properly connected. * Check for any clogs in the air/water nozzle or channel and reprocess if necessary.
What to do if my FujiFilm 700 image is dark?
If the image appears dark on your FujiFilm Medical Equipment, try the following: Ensure the endoscope is correctly connected to the light source. Adjust the brightness level to around 0. Change the iris mode to “AVE.” Clean the light guide cover glass of the scope connector, the objective lens, or the light guides using soft, sterile gauze moistened with alcohol to remove any moisture or foreign matter.
Why is the suction weak on my FujiFilm Medical Equipment?
If you're experiencing low suction volume with your FujiFilm Medical Equipment, consider these possible causes: The suction valve or forceps valve may be damaged and need replacement. Ensure the suction tube and forceps valve are properly attached. Check if the water jet inlet cap is open and close it to block the water jet inlet.
What causes distorted images on FujiFilm Medical Equipment and how to fix it?
Distorted images on your FujiFilm Medical Equipment can be caused by high-frequency interference. To fix it, stop the power supply to the high-frequency endotherapy device to restore image output. Also, make sure that the endoscope is properly connected to the light source.
Why air/water supply does not stop on FujiFilm 700?
If the air/water supply on your FujiFilm Medical Equipment doesn't stop, it could be due to foreign matter adhering to the air/water valve, or the valve may be damaged or degraded. Reprocess the air/water valve or replace it with a new one.
How to fix images that cannot be captured on image recorder with FujiFilm 700 Medical Equipment?
To fix images that cannot be captured on the image recorder with your FujiFilm Medical Equipment, ensure the image recorder is connected and connected properly.
Why is it too difficult to turn the flexibility adjustment ring on my FujiFilm 700 Medical Equipment?
If it is too difficult to turn the flexibility adjustment ring on your FujiFilm Medical Equipment, the insertion tube may be looped. Straighten the insertion tube.
What to do if sterile water does not come out of water jet nozzle on FujiFilm 700 Medical Equipment?
If no sterile water comes out of the water jet nozzle on your FujiFilm Medical Equipment, check if the J tube or water jet channel is clogged with foreign matter and reprocess it. Ensure the J tube is connected and not damaged; replace if necessary. Also, re-check all components of the water pump per manufacturer’s instructions.
Why is the operation of the air/water valve heavy on my FujiFilm 700 Medical Equipment?
If the operation of the air/water valve feels heavy on your FujiFilm Medical Equipment, it could be due to increased friction resistance between the air/water valve and the air/water valve cylinder. Detach the air/water valve and moisten the rubber seal with sterile water.
General| Brand | FujiFilm |
|---|---|
| Model | 700 Series |
| Category | Medical Equipment |
| Language | English |
Provides necessary information for using the product, including equipment overview, operation procedures, and precautions.
Instructions for managing and storing the Operation and Reprocessing Manuals together as a set.
Specifies the intended use of FUJIFILM Endoscope Models EC-760Z-V/M and EC-760Z-V/L for observation, diagnosis, and treatment.
Advises on exercising proper clinical judgment for the applicability of endoscopy and treatment.
Outlines responsibilities for use/maintenance and intended medical professional users.
Prohibits modification, disassembly, or unauthorized repairs to prevent liability for defects.
Details reprocessing requirements before first use, after servicing, use, and storage.
Emphasizes preparing spare endoscopes for unexpected events and ensuring readiness for procedures.
Advises on regular checks by service personnel due to component deterioration from use.
Explains the safety signs used throughout the product manual.
Provides guidelines for safely carrying and transporting the endoscope to prevent damage or infection.
Advises on proper connection to protective earth receptacles and avoiding incompatible equipment.
Details precautions to prevent electromagnetic interference when using the product.
Covers essential safety warnings and cautions for handling the endoscope and accessories.
Warns against using unspecified related equipment to ensure safety and functionality.
Instructions to check endoscope and components against package items for damage or missing parts.
Details the names and functions of various parts of the endoscope.
Describes the components and their functions at the distal end of the endoscope.
Explains how to adjust the flexibility of the insertion tube using the mechanism.
Describes the optical zoom function for magnifying images and adjusting focus simultaneously.
Shows the positions of labels affixed to the product for identification.
Lists recommended combinations of related equipment for system setup.
Illustrates the workflow of using standard functions with relevant section references.
Details the preparation of the endoscope, accessories, and related equipment before use.
Explains the procedure for transporting a reprocessed endoscope safely.
Provides steps for visually and manually inspecting the endoscope for abnormalities before use.
Guides on inspecting and attaching key accessories like forceps valve, suction valve, etc.
Covers preparation steps for essential related equipment and system setup.
Details the procedures for connecting the endoscope to the light source and other equipment.
Describes how to inspect key functions when using the endoscope with related equipment.
Outlines the necessary preparations before commencing the procedure.
Details procedures for inserting the endoscope and observing images, including mechanism use.
Explains how to operate the water jet function for cleaning or spraying an area.
Describes how to use the optical zoom function to enlarge or reduce the image.
Provides steps for filling a syringe and injecting fluids through the instrument channel.
Covers procedures for performing treatments, including using endotherapy devices and high-frequency treatments.
Details the correct procedures for withdrawing the endoscope safely after use.
Instructs on reprocessing the endoscope and accessories as per the Reprocessing Manual.
Lists common problems and their remedies for displayed images, scope switches, and bending sections.
Provides procedures for withdrawing the endoscope when abnormalities occur during a procedure.
Details specific handling procedures for endoscopes with abnormalities, like suction valve issues.
Guides on providing details and returning the endoscope for evaluation or repair.
General advice to check the manual or contact a dealer if the product is not working.
Details warranty periods, void conditions, and contact information for repairs.
Provides key specifications including electrical safety, EMC standards, and applied parts.
Outlines operating, transport, storage environments, and the term of validity.
Lists accessories with limited life expectancy that require replacement upon wear.
Lists compatible processors, light sources, tanks, pumps, and other related equipment.
Provides detailed information on emission and immunity compliance according to EMC standards.
Instructs on proper disposal of electrical and electronic equipment to prevent environmental harm.
