Ⓒ 2018 Fujikura Ltd.
How to set to rotate the blade automatically by detecting worn blade
Bluetooth communication between Fujikura fusion splicers and cleavers provides a useful
function.
Cleaver blade rotates automatically by detecting worn blade.
This document shows example in case of 41S and CT50 combination.
1. Open Bluetooth setting menu and set [Splicer] and [Cleaver] to ON
2. Cleaver setting window appears in READY screen. If not appears, turn off and restart.
3. Open Bluetooth setting menu and pair with CT50
4. Set each [Blade Position Change], [Blade Height Change] and [Blade Replacement] to
ON.
To Next Page
