Fujitsu Siemens Computers D1214 - User Manual

COMPONENT
.com Additional Technical Manual
System board D1215 / D1214

Summary

Introduction

Features

Mechanics

Layout

Describes the physical layout and connectors of the ext=

Connectors

Power supply monitoring

Details the pins and signals for power supply monitoring.

Intrusion connector for case open detect for optional push-button (opener)

Describes the intrusion connector for case open detection.

Serial port 2 (COM 2)

Front panel connector

Fan 2 connector

Wake On LAN (WOL) connector

USB port C; D 1 - Dual channel

CD-ROM audio connector (internal)

Auxiliary (MPEG, TV) audio connector (internal)

Fan 1 connector

Configuration

Functions controlled by the configuration switch

Details how configuration switches affect board functions.

Power

Power requirement

Specifies voltage, variation, and current for power sources.

Power loadability

Details fuse numbers, maximum current, and associated functions.

Documentation

Installing drivers

Instructions for installing drivers from the 'Drivers & Utilities' CD.

Upgrading main memory

Details memory support, size, technology, and granularity for upgrades.

Troubleshooting

Message BIOS update

Addresses BIOS update messages for installed CPUs.

The screen stays blank

Discusses causes and solutions for a blank screen.

Fujitsu Siemens Computers D1214 Specifications

General

Socket Type	LGA 775
Memory Type	DDR2
Expansion Slots	1 x PCIe x16, 2 x PCI
Storage Interfaces	4 x SATA
USB Ports	8 x USB 2.0