Need help?Do you have a question about the Fujitsu Siemens Computers D1219 and is the answer not in the manual?
General| Socket Type | LGA 775 |
|---|---|
| Number of Memory Slots | 4 |
| Memory Type | DDR2 |
| Storage Interfaces | 4 x SATA |
| USB Ports | 8 x USB 2.0 |
| Video Outputs | VGA |
| Expansion Slots | 1 x PCIe x16, 2 x PCIe x1, 1 x PCI |
Details the pinout and signals for the serial chipcard reader or internal serial port 2 (COM 2).
Provides pinout and signal information for the front panel connector, including LEDs and buttons.
Details the pinout and signals for the supervised fan 2 connector.
Details the pinout and signals for the Wake On LAN (WOL) connector.
Provides pinout and signal information for the dual-channel USB port.
Provides pinout and signal information for the single-channel USB port.
Details the pinout and signals for the internal CD-ROM audio connector.
Details the pinout and signals for the internal auxiliary audio connector.
Details the pinout and signals for the controlled and supervised fan 1 connector.
Details the pinout and signals for power supply monitoring.
Details the pinout and signals for the case open detect intrusion connector.
Explains how configuration switches affect system functions like password skip and BIOS recovery.
Details the voltage, variation, and current requirements for main and auxiliary power supplies.
Instructions for accessing and installing technical manuals and BIOS information from the CD.
Steps to install drivers from the CD, including selecting the system board and OS.
Explains the 'BIOS update for installed CPU failed' message and where to find more information.
Discusses potential causes for a blank screen, including RAM issues and ACPI compliance.
To Next Page