LCD TV MYRICA V27-1 / V32-1
12 - English A26361-K1037-Z120-1-M119, edition 1
Setting language of the OSD menu
After switching on the device, set the language of the OSD (On Screen Display) menu according to
your needs.
► Switch the LCD TV on with the ON/OFF switch.
► Press the POWER button.
► Press the MENU button to open the OSD menu.
► Choose the SYSTEM menu item using the
button.
► Press the
button to activate the menu item.
The menu item LANGUAGE is preset.
► Press the
button to activate the menu item.
► Select the language to be shown in the OSD menu with the
button.
► Press the Menu button. The OSD menu will be changed over to the selected language.
Carrying out programme search
A programme search must be carried out to put the LCD TV into operation. Use the supplied remote
control.
► Switch the LCD TV on with the ON/OFF switch.
► Press the POWER button.
► Press the MENU button to open the OSD menu.
► Choose the TV SETUP menu item using the
button.
► Press the
button to activate the menu item.
The menu item CH-SCAN is preset.
► Press the
button to activate the menu item.
► Select your country with the
button.
► Press the
button to start the programme search.
Wait until the programme search is completed. Then the device shows the first programme found.
i
Different programmes are available on some channels at different times. As a result, it is
possible that, depending on the time of a programme search, different programmes will be
found.
Downloaded From TV-Manual.com Manuals
To Next Page
Loading...
Need help?
General