Fujitsu ACUH18LUAS1 - Page 210

6. Select the item number to be set with the SET TEMP. or SET TEMP. button, and press
the
/
button to switch to the setting screen.
7. Select the “13” in Menu 2-F1 settings. Then, press the
/
button.
8.
Select the 2-wire remote controller address with the SET TEMP.
or SET TEMP. button.
Then press the
/
button.
Select the 2-wire remote controller
address (Ex. Select the 002-03)
9. Set the function number with the SET TEMP. or SET TEMP. button. Then press the
/
button.
Function number
10. Set the setting number with the SET TEMP. or SET TEMP. button. Then press the
/
button.
Setting number
- 204 -
16-5. Indoor unit (setting by simple remote controller) 16. Function settings
MULTI-SPLIT TYPE 5-unit type MULTI-SPLIT TYPE 5-unit type