Fujitsu AO G12KATA Series Design & Technical Manual


Input signal type
• Indoor unit
Input signal type is only "Edge".
Edge
• External Input and Output PCB
The input signal type can be selected.
Signal type (edge or pulse) can be switched by the DIP switch 2 (SW2) on the External Input and
Output PCB.
Edge
Pulse
The width of pulse must be
longer than 200 msec.
NOTE: The input signal supports the following switch type:
• Edge: Alternate type switch
• Pulse: Momentary type switch
- 188 -
12-1. Compact cassette type, Medium static pressure duct type (ARXH22KMTAP), and
Ceiling type
12. External input and output
4-5 UNIT MULTI-SPLIT TYPE 4-5 UNIT MULTI-SPLIT TYPE

Fujitsu AO G12KATA Series Specifications

General

Brand	Fujitsu
Model	AO G12KATA Series
Category	Air Conditioner
Language	English