Fujitsu AO G12KATA Series User Manual

1) Remote controller address setting (for Wall-mounted type only)
NOTES:
• Because this setting is normally done automatically when 2-wire-type wired remote controller is
installed, setting is unnecessary.
• This setting is configurable only by wireless remote controller, but not configurable by Polar 3-
wired remote controller.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function number Setting value Setting description Factory setting
00
00 Unit no. 0 ♦
01 Unit no. 1
02 Unit no. 2
03 Unit no. 3
04 Unit no. 4
05 Unit no. 5
06 Unit no. 6
07 Unit no. 7
08 Unit no. 8
09 Unit no. 9
10 Unit no. 10
11 Unit no. 11
12 Unit no. 12
13 Unit no. 13
14 Unit no. 14
15 Unit no. 15
NOTES:
• When connecting Polar 3-wired remote controller, set the remote controller address in the order
of 0, 1, 2, ....., and 15.
• When different type of indoor units (such as wall mounted type and cassette type, cassette type
and duct type, or other combinations) are connected using group control system, some func-
tions may no longer be available.
2) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated
amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function number Setting value Setting description Factory setting
11
00 Standard
01 Long interval
02 Short interval
03 No indication ♦
Setting description Compact cassette Mini duct Slim duct Wall mounted
Standard 2,500 hours 400 hours
Long interval 4,400 hours 1,000 hours
Short interval 1,250 hours 200 hours
1-5. Function details - (05-40) - 1. Function settings (for indoor unit)
FIELD WORKING FIELD WORKING

Fujitsu AO G12KATA Series Specifications

General

Brand	Fujitsu
Model	AO G12KATA Series
Category	Air Conditioner
Language	English