¢
Others
Exterior Part name Model name Summary
Human sensor
kit
UTY-SHZXC For circular flow cassette type.
External
connect kit
UTY-XWZXZG
Use to connect with various peripheral
devices and air conditioner PCB.
For control output port.
Air outlet shutter
plate
UTR-YDZK
Installed at the air outlet when 3-
directions mode is performed.
Wide panel UTG-AKXA-W
Hides the gap between the ceiling hole
and the cassette grille.
Panel spacer UTG-BKXA-W
If there is not enough height in the
ceiling space, by inserting this spacer
between the cassette grille and the
ceiling surface, the height of the unit
body goes into the ceiling space
become 50-mm lower.
Fresh-air intake
kit
UTZ-VXRA
By attaching Fresh-air intake kit to the
indoor unit, it can be taken in fresh air
of up to 10% of “high” air volume of
the indoor unit.
Insulation for
high humidity
UTZ-KXRA
Install when the under-roof condition is
expected to be the humidity of over
80% and the temperature of over
30 °C.
External input
and output PCB
UTY-XCSX
Use to connect with external devices
and air conditioner PCB.
External input
and output PCB
box
UTZ-GXRA
For installing the External input and
output PCB.
6-1. Indoor unit
- (02-26) - 6. Optional parts
TECHNICAL DATA
AND PARTS LIST
TECHNICAL DATA
AND PARTS LIST
To Next Page
Loading...
Need help?
General
