Fujitsu AO G36KBTB Series Service Manual

7. Press the
/
button once to transmit the function setting information. 1 short beep will be emit-
ted from the indoor unit or the IR receiver when the signal is received correctly. If wrong code is
set, no beep sound will be emitted.
1 short beep
NOTE:
Press
/
button within 30 seconds after pressing MODE button.
For the function details, refer to Chapter 1-8. "Function details" on page 05-27.
8. Exit the function setting mode by pressing the RESET button.
RESET
1-5. Indoor unit (setting by wireless remote controller) - (05-14) - 1. Function settings
FIELD WORKING FIELD WORKING

Fujitsu AO G36KBTB Series Specifications

General

Brand	Fujitsu
Model	AO G36KBTB Series
Category	Air Conditioner
Language	English