Fujitsu AOTG36LATL User Manual

En-9
2-3. Setting items in Submenu
°
C
26
Mode
Menu
Cool
Monitor
Set temp.
Fan
High
Mo
10:00
Menu
Function
Timer
Submenu
Mo
10:00
Setting:
Back:
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo
10:00
Setting:
Back:
Submenu
[
1/2
]
Initial
Management
Key lock select
Child lock
Monitor
Submenu
2/2
Mo 10:00
Back:
Setting:
Following items can be adjusted in Submenu.
NOTES
• Functionmarked“–”in“Secondaryunit”columnoffollowingtablecannotbeadjustedfromtheremotecontrollerthatisspecied
as the secondary control unit. Adjust the function on the primary unit.
• Depending on the type of the indoor unit, some functions cannot be set.
Settings and Display Items Details
Operation
(See page)
Second-
ary unit
Date and
time
Date Sets and corrects the date.
21 O
Time Sets and corrects the time.
22 O
Summer time
Daylight saving time
Sets or cancels daylight saving time.
22 O
Change display format The display format for the date and time can be changed. 22 O
Screen The LCD backlight time, backlight brightness, and LCD contrast can be
changed.
23 O
Filter sign*
1
Filter sign reset Removestheltersign. 24 O
Display Switchesbetweendisplayingandnon-displayingtheltersign. 24 O
R.C. (Remote Controller) sensor
control*
1,
*
2
The room temperature sensor of the indoor unit can be switched to the
room temperature sensor that is built into this remote controller.
NOTE
•
This setting can be set on either of one of the primary unit or the
secondary unit.
25 O
Room temp. (temperature) display Switches between displaying and non-displaying the room temperature.
The displayed room temperature is the temperature around the remote control.
25 O
Key lock
select
Child lock Restricts all the button operation. 26 O
Part lock Restricts the [Menu button] operation. 26 O
Initial Language*
2
Switches the display language of the remote control.
Thefollowinglanguagescanbeselected:English,German,French,
Spanish, Italian, Greek, Russian, Portuguese, and Turkish.
26 O
Temp. (Temperature)
unit
Switches the set temperature and the room temperature display
between Celsius and Fahrenheit.
27 O
Password setting Password for “Management” function setting can be set.
(Refer to the installation manual.)
- O
Management Restricts the operations of some functions by non-authorized person.
With the password control, only the administrator can get access to the
function setting.
(Refer to the installation manual.)
- O
Zone user
setting*
3
Day/Night setting Enables the simultaneous setting of zone(s) and room-temperature sensor reg-
istered into two groups that you might have different lifestyle; “Day” and “Night”.
27 –
Name setting Enables registration of desired name for each zone, group, and room-
temperature sensor.
28 O
*
1
:Functionssettoinactiveatthefactory,andtheyarenotdisplayedonthe“Submenu”screen.Toactivatethesefunctions,
consult authorized service personnel.
*
2
:Dedicatedfunctionsfornon-zone-controlledsystem.
*
3
:Dedicatedfunctionforzone-controlledsystem.
9381067145_OM_EN.indd 9 14/09/2015 13:48:01

Fujitsu AOTG36LATL Specifications

General

Brand	Fujitsu
Model	AOTG36LATL
Category	Air Conditioner
Language	English