Fujitsu AOU36RLXFZ1 - Page 59

582015.03.02
DECORATION PANEL UTG-CCGF
Parts Q’ty Connector cover
1
For covering connector Tapping screw (M5 x 12 mm)
4
For mounting decoration panel Tapping Screw (M4 x 12 mm)
1
For mounting connector cover L angle
2
For mounting a hook wire to a decoration panel Hook wire
2
For suspending a decoration panel Screw [pitch small] (M4 x 10 mm)
2
For mounting a hook wire (for metals) Screw [pitch large] (M4 x 10 mm)
4
For mounting an L angle and hook wire (for resins)
Parts Q’ty
1 1 4 4 1 1 1
Parts Q’ty
1 1 1 2
INDOOR UNIT COMPACT CASSETTE AUU7RLF, AUU9RLF, AUU12RLF, AUU18RLF
Special nut A (Large flange) For installing indoor unit Special nut B (Small flange) For installing indoor unit Template (carton top) For cealing openings cutting Also used as packing Drain hose Hose band
Drain hose insulation For installing drain pipe Remote control Remote control cable Tapping screw (M4 x 16 mm) For installing a wired remote control
Coupler heat insulation (Small) For indoor side pipe joint (Liquid pipe) Coupler heat insulation (Large) For indoor side pipe joint (Gas pipe)
For connecting a remote control