To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu AOU60RLAVM4 and is the answer not in the manual?
General| Cooling Capacity | 6.0 kW |
|---|---|
| Refrigerant | R410A |
| Voltage | 220-240 V |
| Phase | Single |
| Compressor Type | Inverter |
| Type | Split System |
| Brand | Fujitsu |
| Model | AOU60RLAVM4 |
Safety guidelines for handling R410A refrigerant, emphasizing pressure differences and material compatibility.
Lists and describes specialized tools required for R410A refrigerant work.
Guidelines for choosing a suitable location for the outdoor unit considering safety and environmental factors.
Specifies clearance requirements for the outdoor unit for proper ventilation and maintenance.
Procedures for physically installing the outdoor unit, including foundation and anchoring.
Essential safety measures for electrical wiring, including grounding and circuit protection.
Guidance on choosing correct power cables and circuit breakers based on local regulations.
Procedure for leak testing the refrigerant piping using nitrogen gas.
Steps for evacuating the refrigerant system using a vacuum pump.
Instructions on how to add refrigerant to the system.
Step-by-step procedure for adding refrigerant to the system.
How to calculate and verify the total refrigerant amount for the system.
Verifying indoor unit connections before starting system testing.
Procedure for conducting the test run for the installed system.
Step-by-step guide for performing the indoor unit connection check.
Explains how errors are displayed on the 7-segment display.
Codes indicating system errors and their descriptions.
