Fujitsu ARYG24LMLA User Manual

En-7
Press the ECONOMY button for more than 2 seconds to select
whether the room temperature is detected at the indoor unit or
the remote controller.
When the
thermo sensor indicator appears, the room
temperature is detected at the remote controller.
NOTES
• If this function is locked, the location where the room temperature is detected cannot be changed and the mark fl ashes
when the ECONOMY button is pushed for 2 seconds or more.
Indoor unit
Room temperature sensor selection
OPERATION
Child lock function
Press the DAY (DAY OFF) button and TIMER SET button simul-
taneously for 2 seconds or more to activate the child lock func-
tion and lock all of the buttons on the remote controller except
the START/STOP button, SET TEMP. buttons, MODE button,
and FAN button. Press the buttons again for 2 seconds or more
to deactivate the child lock function.
When the child lock function is activated, the
mark
appears. If any button is pressed during the child lock, the
CL
indicator fl ashes.
•
This function is locked at the factory. In order to detect the room temperature correctly, consult authorized ser-
vice personnel when using this function.
9374379569-02_OM.indb Sec1:79374379569-02_OM.indb Sec1:7 2012-3-27 16:49:482012-3-27 16:49:48

Fujitsu ARYG24LMLA Specifications

General

Type	Air conditioner indoor unit
Multi-split	-
Product color	Black, Stainless steel
Inverter technology	Yes
Refrigerating medium	R410A
Air conditioner functions	Cooling, Dehumidifying, Heating
Refrigerating medium weight	1700 g
Cooling capacity in watts (nominal)	- W
AC input voltage	230 V
AC input frequency	50 Hz
Hourly energy consumption (cooling)	- kWh
Design load (heating) (Warmer heating season)	- kW
Energy efficiency class (heating) (Average heating season)	A+
Outdoor unit noise level	- dB
Airflow	1100 m³/h
Indoor unit type	Cassette
Indoor unit depth	700 mm
Indoor unit width	1135 mm
Indoor unit noise level (high speed)	31 dB