Fujitsu ARYG24LMLA - Operation; Setting Operation Mode and Fan Speed

En-6
OPERATION
Temperature setting range
AUTO ............................................... 18 to 30 °C
COOL/DRY ...................................... 18 to 30 °C
HEAT* .............................................. 16 to 30 °C
Lower Rise
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
Press the START/STOP button.
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
Press the SET TEMP. buttons to set the room temperature.
Press the FAN button to set the fan speed.
Press the ECONOMY button to start or stop ECONOMY opera-
tion.
For details on the function, refer to page 12.
To start/stop operation
To set the operation mode
●
Operation mode setting
●
Room temperature setting
●
Fan speed setting
ECONOMY operation
AUTO
COOL
DRY
FAN
HEAT*
AUTO
HIGH
MED
LOW
QUIET
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
9374379569-02_OM.indb Sec1:69374379569-02_OM.indb Sec1:6 2012-3-27 16:49:482012-3-27 16:49:48