Fujitsu ARYG72LHTA - Page 34

01-30
1-00. ERROR HISTORY MODE
•
In this mode, the history of abnormality that occurred in the past can be confirmed.
(Table : 26 Procedure for History Mode )
Procedure Operation
Power
Mode
1
2
3
4
During status display, press the MODE SWITCH 2 times.
(Status display : Outdoor unit is stopping and no error)
When the EXIT SWITCH is pressed, this mode
ends and returns to the
status display .
Selecting display items can be done by pressingthe
SELECT SWITCH. (Return to Procedure 3)
Press the ENTER SWITCH, Error code is displayed by
lighting LED. (Refer to Table : 28)
When the POWER / MODE LED blin
king 2 times,
press the ENTER SWITCH.
: Light ON: Light OFF : Blinking 2 : 2 Times Blinking
n : n Times Blinking
1-26-3 Error history mode
Error L1 L2 L6L5L4L3
2
2
2
2
2
5
Press the SELECT SWITCH and adjust to DISPLAY ITEM
(from L1 to L3) that you want to confirm. (Refer to Table : 27)

n n
DATA
LED
Power / Mode
LED
Display Item
ERROR
L1 L2 L3
(Table :27 Display pattern )
: Light ON: Light OFF n : n Time Blinking
: Blinking
Newest error code
Error code before 1 time
Error Code
2
Error code before 2 times