Need help?Do you have a question about the Fujitsu AS G09LLCC Series and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | AS G09LLCC Series |
| Category | Air Conditioner |
| Language | English |
Details how the compressor frequency is controlled based on room temperature for cooling.
Explains compressor frequency control based on room temperature during heating.
Describes compressor frequency adjustment for dry mode based on detected room temperature.
Details automatic switching between heating, cooling, and dry modes based on temperature.
Explains fan speed settings and airflow control for the indoor unit in various modes.
Covers outdoor fan motor type and fan speed control based on zone and mode.
Details vertical and right-left louver adjustments and swing operations.
Explains compressor frequency range, start-up control, and limitations by outdoor temperature.
Describes ON/OFF, Program, and Sleep timer functions for the wireless remote controller.
Explains how to perform test operation and its conditions.
Details the 3-minute restart prevention for the compressor after stopping.
Explains the timing of the four-way valve switch from cooling to heating mode.
Covers automatic restart after a power interruption, memorizing previous settings.
Describes manual operation using the indoor unit's button when the remote is lost.
Explains forced cooling operation settings and conditions.
Details the preheating process for the compressor when the outdoor heat exchanger is cold.
Explains the ECONOMY operation mode, which reduces output to about 70%.
Describes the POWERFUL operation mode for maximum power output.
Covers the conditions for starting and completing defrost operations.
Details the automatic defrost operation when operation stops in heating mode.
Explains protections like discharge gas temperature and current release controls.
Lists error codes and corresponding flashing patterns of indoor unit lamps.
Provides troubleshooting steps for specific error codes, starting with serial communication errors.
Offers troubleshooting for issues like 'Indoor Unit - No Power' without error codes.
Provides information on service parts and troubleshooting for components like the compressor.
Details on setting various functions for the indoor unit, including filter signs and temperature corrections.
Provides resistance and voltage values for indoor and outdoor unit thermistors at various temperatures.
To Next Page