To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu ASHG18KMTB and is the answer not in the manual?
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Noise Level (Outdoor Unit) | 50 dB(A) |
| Type | Split System |
Provides detailed specifications for indoor and outdoor units, covering capacity, power, airflow, and sound levels.
Details the physical dimensions and installation space requirements for various indoor and outdoor unit types.
Lists and illustrates component parts for various indoor unit types, including compact cassette, mini duct, and wall-mounted.
Provides a detailed breakdown of parts for outdoor units, including models AOHG30KBTA4 and AOHG36KBTA5.
Illustrates the PC board layouts for various indoor and outdoor unit models, crucial for diagnostics and repair.
Explains how to check and erase error memory, and provides tables of error codes for indoor and outdoor units.
Provides step-by-step diagnostic procedures for various error codes to identify and resolve issues.
Offers guidance for diagnosing and resolving common operational problems like no power, no cooling/heating, and abnormal noise.
Details how compressor rotation number is controlled based on room temperature and outdoor temperature zones.
Explains indoor and outdoor fan speed settings, airflow changes, and operational modes like cooling, heating, and dry.
Explains the operation of On/Off, Program, Sleep, and Weekly timers for controlling the air conditioner's schedule.
Outlines protection mechanisms like discharge gas temperature over-rise, anti-freezing, current release, and high pressure protection.
Details how to adjust indoor unit functions via DIP switches and remote controllers for different unit types.
Explains how to perform function settings on the outdoor unit using DIP switches and push switches.
Provides procedures for check run, failure indications, and memory resetting for automatic wiring correction.
