EasyManua.ls Logo

Fujitsu ASTG09CMCA - User Manual

Fujitsu ASTG09CMCA
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
En-1PART No. 9333003023
AIR CONDITIONER
Wall Mounted Type
ASTG07CMCA
ASTG09CMCA
ASTG12CMCA
OPERATING MANUAL
Before using this product, read these instructions thoroughly and keep this manual for future reference.
Safety Precautions
To prevent personal injury, injury to others, or property damage, read this section carefully before you use this product, and be sure to comply to the
following safety precautions.
Incorrect operation due to failure to follow the instructions may cause harm or damage, the seriousness of which is classi¿ ed as follows:
WARNING CAUTION
This mark warns of death or serious injury. This mark warns of injury or damage to property.
This mark denotes an action that is PROHIBITED.
This mark denotes an action that is COMPULSORY.
Explanation of symbols displayed on the indoor unit or outdoor unit.
WARNING
This symbol shows that this appliance uses a À ammable refrigerant. If the refrigerant is leaked and exposure to an external
ignition source, there is a risk of ¿ re.
CAUTION
This symbol shows that the Operation Manual should be read carefully.
CAUTION
This symbol shows that a service personnel should be handling this equipment with reference to the Installation Manual.
CAUTION
This symbol shows that information is available such as the Operating Manual or Installation Manual.
WARNING
The appliance contains no user-serviceable parts. Always
consult authorized service personnel for repairing, installation,
and relocation of this product.
Improper installation or handling will cause leakage, electric
shock, or ¿ re.
In the event of a malfunction such as burning smell,
immediately stop operation of the air conditioner, and
disconnect all the power supply by turning off the electrical
breaker or disconnecting the power plug. Then consult
authorized service personnel.
Take care not to damage the power supply cable.
If it is damaged, it should only be replaced by authorized
service personnel.
In the event of refrigerant leakage, be sure to keep away
from ¿ re or any À ammables, and consult authorized service
personnel.
If you see lightning or hear thunder, there might be a lightning
strike.
To prevent electric shock hazard, turn off the air conditioner
by using the remote controller, and do not touch the unit or
the power plug during thunderstorm.
The appliance shall be stored in a room without continuously
operating ignition sources (for example: open À ames, an
operating gas appliance or an operating electric heater).
The appliance shall be stored in a well-ventilated area.
Be aware that refrigerants may not contain an odour.
The appliance shall be stored so as to prevent mechanical
damage from occurring.
Disposing of the product shall be done properly, in
compliance with national or regional regulations.
During transportation or relocation of the indoor unit, pipes
shall be covered with the wall hook bracket for protection.
Do not move the appliance by holding the indoor unit pipes.
(The stress applied to the pipe joints may cause the
À ammable gas to leak during operation).
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
(continued)
Contents
Safety Precautions ..........................................................En-1
Indoor Unit Overview and Operations .............................En-3
Remote Controller Overview and Operations ..................En-4
Timer Operation...............................................................En-6
Human Sensor (Energy Saving) ......................................En-8
Demand Response and Indoor Unit Operation ...............En-8
General Informations on Operation .................................En-9
Care and Cleaning.........................................................En-10
Troubleshooting ............................................................. En-12
R32
REFRIGERANT
This Air Conditioner contains and
operates with refrigerant R32.
THIS PRODUCT MUST ONLY BE INSTALLED OR SERVICED
BY QUALIFIED PERSONNEL.
Refer to Commonwealth, State, Territory and local legislation,
regulations, codes, installation & operation manuals, before
the installation, maintenance or service of this product.
9333003023_OM_EN.indd 1
9333003023_OM_EN.indd 1
8/12/2013 8:53:38 AM
8/12/2013 8:53:38 AM

Questions and Answers:

Fujitsu ASTG09CMCA Specifications

General IconGeneral
BrandFujitsu
ModelASTG09CMCA
CategoryAir Conditioner
LanguageEnglish

Summary

Safety Precautions

Safety Symbols Explanation

Explains the meaning of warning and caution symbols used in the manual.

General Safety Warnings and Cautions

Provides crucial warnings and cautions for safe operation, installation, and maintenance.

Prohibited Actions

Details actions that must be strictly avoided to prevent injury or damage.

Recommended Operating Practices

Outlines recommended procedures for safe and optimal usage, including ventilation and placement.

Indoor Unit Overview and Operations

Intake Grille Check

Ensures the intake grille is properly closed for optimal product function and performance.

Manual AUTO Button Operation

Enables operation and stopping of the unit without the remote controller.

Human Sensor for Energy Saving

Controls temperature settings by detecting people in the room for energy efficiency.

Vertical Airflow Direction Control

Adjusts the angle of the vertical airflow direction louver for optimal air distribution.

Power Diffuser Functionality

Works in conjunction with vertical louvers to adjust the angle of the power diffuser.

Remote Controller Signal Receiver

Details placement considerations for the signal receiver for optimal transmission.

Operation Indicators

Explains the meaning of ECONOMY and TIMER indicator lights on the indoor unit.

Remote Controller Overview and Operations

Remote Controller Handling Precautions

Provides crucial cautions for handling the remote controller to prevent damage or malfunction.

Quick Start Operation

Guides users through quick start operation using key buttons like START/STOP, MODE, and TEMP.

POWERFUL Operation Mode

Activates maximum power and strong airflow for rapid cooling.

ECONOMY Operation Mode

Initiates energy-saving operation by adjusting temperature settings moderately.

Fan Speed Control

Allows users to control and adjust the fan speed of the air conditioner.

Automatic Airflow Swing

Starts or stops the automatic swing of the vertical airflow direction louver.

Timer Functionality

Enables activation of WEEKLY, SLEEP, and ON/OFF timer functions.

Remote Controller Settings and Adjustments

Covers functions for setting clocks, timers, and adjusting various settings.

Outdoor Unit Noise Reduction

Lowers noise generated from the outdoor unit by adjusting compressor and fan speed.

Energy Saving Program Activation

Activates or deactivates the energy saving program for the unit.

Timer Operation

Setting ON;OFF Timers

Provides step-by-step instructions for setting single ON or OFF timers.

Integrated Program Timer Setup

Allows setting integrated ON-OFF or OFF-ON timers for combined operation.

SLEEP Timer for Comfort

Activates SLEEP timer for comfortable sleep with gradual temperature control.

WEEKLY Timer Programming

Enables setting up to 4 programs per day for a full week.

Configuring WEEKLY Timer Settings

Details on selecting program number, day, mode, time, and temperature for WEEKLY timer.

Human Sensor (Energy Saving)

Energy Saving Program Control

Instructions for activating and deactivating the Energy Saving program.

Energy Saving Operation Details

Explains how the system automatically controls temperature when the room is unoccupied.

Human Sensor Detection and Limitations

Details the human sensor's detection mechanism and potential limitations.

Demand Response and Indoor Unit Operation

Demand Response Program Compatibility

Explains compatibility with Air Conditioning Demand Response programs.

Demand Response Mode Operations

Details different DR modes and their effect on unit operation, plus indicator signals.

General Informations on Operation

Auto-Restart Functionality

Describes how the unit automatically restarts and performs previous operation after power resumption.

Electrical Device Interference

Explains potential malfunctions caused by other electrical appliances or transmitters.

Operating Temperature and Humidity Ranges

Specifies the permissible indoor temperature and humidity ranges for operation.

Care and Cleaning

Daily Indoor Unit Cleaning

Provides instructions for routine cleaning of the indoor unit body.

Intake Grille Cleaning Procedure

Step-by-step guide for cleaning the intake grille of the indoor unit.

Air Filter Cleaning Procedure

Instructions on how to clean the air filters regularly for optimal performance.

Air Cleaning Filter Replacement

Guide for replacing the Apple-catechin and Ion deodorization filters.

Preparation After Extended Non-Use

Instructions for preparing the unit after periods of prolonged non-use.

Additional Product Inspection

Recommendations for professional inspection after long-term use or maintenance.

Troubleshooting

Critical Malfunction Warnings

Advises immediate action for critical issues like burning smell or water leaks.

Normal Operation Characteristics

Describes symptoms that are normal functions and not product malfunctions.

Common Troubleshooting Checks

Guides users through diagnostic checks for common operational problems.

Specific Symptom Diagnosis and Solutions

Detailed diagnostic steps for issues like poor cooling or unit operation differences.

Related product manuals