Setting change
OK
NO
YES
Setting DescriptionFunction Number Setting Va lue
Indoor unit
Both
42
00
01
Setting DescriptionFunction Number Setting Value
Both
Wired remote controller
48
00
01
Setting DescriptionFunction Number Setting Value
No correction 0.0°F (0.0°C)
-1°F (-0.5°C)
-2°F (-1.0°C)
-4°F (-2.0°C)
-3°F (-1.5°C)
-5°F (-2.5°C)
-6°F (-3.0°C)
-7°F (-3.5°C)
-8°F (-4.0°C)
No correction 0.0°F (0.0°C)
00
01
02
03
04
05
06
07
08
09
93
(For
heating)
Less
Heating
YES
YES
“Wired remote sensor”
Check Point 3 : Check the remote controller display
Is the "Thermo Sensor Icon" displayed on the screen?
※
Check Point 3-1 : Check Function Setting
Is function 42 (Indoor room temperature sensor
switching function) set to 01?
Ref.)
Please reference the APPENDING DATA
Check Point 3-2 : Check the remote controller
Press and hold down the THERMO SENSOR button
to turn on the icon.
Ref.)
※
Please reference the APPENDING DATA
Using the table on the right adjust temeprature correction
by changing function setting 93.
(Room Temperature control for wired remote controller sensor)
Check Point 6 : Check Function Setting
Is function 48 (Room temperature sensor switching)
set to 01?
Check Point 4 : Check the Function Setting
※
Check Point 4-1: Check the Function Setting
Change setting of function 48
(Room temperature sensor switching) to 01.
Ref.)
Please reference the APPENDING DATA
NO
NO
Check Point 4-2 : Check the effects of Function
Did this function setting improve temperature control?
OK
Is the mounting location of the wired remote
controller affecting the temperature sensing?
(Sunlight on the remote, heat source next to the remote)
Check Point 5 : Location of the remote controller
Check Point 5-1 : Location of the remote controller
Move the remote controller.
Too warm
Too warm
Too warm
02-30
To Next Page
Loading...
