-
01 - 03
-
MULTI TYPE
3-4ROOMS TYPE
MULTI TYPE
3-4ROOMS TYPE
1-2. SELECT FUNCTION
Auto restart
When the air conditioner power was temporarily turned off by a power failure etc.
It restarts automatically after the power recovers.
(Operated by setting before the power failure.)
WALL MOUNTED TYPE
Clean room conditioning is realized by equipping the plasma air cleaner
Plasma air cleaner quickly removes small dust particles and odors.
Original plasma air cleaning unit effectively cleans the air in the room.
Coil dry operation
The indoor unit evaporator can be dried by pressing the COIL DRY button
on the remote control unit.
Wired remote control unit (option)
The optional wired remote control unit can be used.
Auto restart
When the air conditioner power was temporarily turned off by a power failure etc.
It restarts automatically after the power recovers.
(Operated by setting before the power failure.)
CONCEALED CEILING TYPE
Thin and compact indoor unit
Setting the room temperature detection location
The detection location of the room temperature can be selected from the following
three example. Choose the detection location that is best for the installation location.
A. Indoor unit setting ( factory setting )
B. Remote controI unit setting
C. Indoor unit / remote control unit setting ( room temperature sensor selection)
CASSETTE TYPE (COMPACT)
When the air conditioner power was temporarily turned off by a power failure etc.
It restarts automatically after the power recovers. (Operated by setting before the power failure.)
Auto restart
The Remote control unit signal code can be changed by four patterns.
Remote control unit signal code setting
To Next Page
Loading...
Need help?
General
