En-11
■
State of indicator lamps
Lighting pattern: On, Blinking, Any state
State Causes and solutions
See
page
Automatic defrosting operation
⇒
9
Filter indicator
⇒
sign.
8
Error code display
⇒
Consult authorized service personnel.
-
Timer setting error because of Auto restart
⇒
Reset the clock and timer settings.
-
Test run operation (for authorized
personnel only)
⇒
Press
to quit the test run.
-
Restricted function
-
(Slow)
(In multi connection) Standby mode
⇒
Check the set operation mode of the
indoor units.
9
■
Manual Auto operation and Filter indicator
reset
You can operate the air conditioner with on the
indoor unit.
Status Time to keep pressing Mode or operation
In operation More than 3 seconds Stop
Stopping 2 seconds or less Filter indicator reset
More than 3 seconds and
Auto *
(Only for servicing.*
2)
)
Forced cooling
units.
*2) To stop the forced cooling, press this button or
on the remote
controller.
(3 times)
(Fast)
9387858020-02_OM.indb 11 03-Sep-21 13:52:48
To Previous Page
Loading...
Need help?
General
