En-8
Cleaning Ion deodorization lter and
Replacing Apple-catechin lter
1.
2.
holder.
3.
with water.
4.
detergent.
5.
6.
7.
8.
NOTES:
are left in the opened package.
9.
frame.
NOTES:
beyond the frame.
10.
Replacing Ion deodorization lter
1.
2.
3.
Removing and installing intake grille
■
Removing intake grille
1. Open the intake grille until it snaps.
2. Pull the mounting shafts while keeping the intake grille in a
horizontal position.
■
Installing intake grille
1. While holding the intake grille horizontal, set the left and
right mounting shafts into the pillow blocks at the top of the
front panel.
Insert the shaft until it snaps to latch each shaft properly.
2. Close the intake grille.
3.
After extended non-use of the unit
Fan mode operation for half a day to dry the internal parts thoroughly
before the normal operation.
Additional inspection
After long period of use, accumulated dust inside the indoor unit may
reduce the performance even if you have maintained the unit properly.
In such a case, a product inspection is recommended.
For more information, consult authorized service personnel.
Filter indicator reset (Special setting)
This function can be used if set correctly during installation. Please
consult authorized service personnel in order to use this function.
following:
Indicator lamp Blinking pattern
on the
indoor unit for 2 seconds or less.
9387858020-02_OM.indb 8 03-Sep-21 13:52:47
To Next Page
Loading...
Need help?
General
