To Next PageTo Next PageWhat to do if my Fujitsu ASYA12LGC has an indoor fan lock error?
If your Fujitsu Air Conditioner is displaying an indoor fan lock error, check the fan motor connector for looseness or defective contact.
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.4 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 9 kg |
| Power Input (Cooling) | 1060 W |
| Power Input (Heating) | 1110 W |
| Noise Level (Indoor) | 43 dB(A) |
| Air Flow (Indoor) | 700 m3/h |
Error codes and troubleshooting for Classic models.
Error codes and troubleshooting for AGYV floor models.
Detailed troubleshooting for inverter outdoor units.
Step-by-step analysis of the diode bridge.
Analysis and testing of the active filter module.
Component and operational tests for the IPM module.
Technical specifications for ASY9/12LSACW models.
Wiring diagrams for ASY9/12LSACW indoor/outdoor units.
Diagram illustrating refrigerant flow and components.
Step-by-step installation overview.
Procedure for connecting gauges and vacuuming.
Steps for performing nitrogen pressure testing.
