Need help?Do you have a question about the Fujitsu ASYA18GBCH and is the answer not in the manual?
General| Cooling Capacity | 5.2 kW |
|---|---|
| Heating Capacity | 6.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 11.5 kg |
| Weight (Outdoor Unit) | 36 kg |
| Type | Split System |
| Energy Efficiency Ratio (EER) | 3.21 |
| COP | 3.61 |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Noise Level (Outdoor) | 51 dB |
| Dimensions (Outdoor Unit) | 790 x 540 x 290 mm |
Outlines procedures and precautions before executing test runs.
Details the methods for conducting test runs.
Lists items to check before powering on the unit.
Lists items to check after powering on the unit.
Describes automatic address setting for signal amplifiers.
Describes automatic address setting for indoor units.
Details the procedure for checking indoor unit connections.
Explains how to perform test runs from the outdoor main PCB.
Explains master control functions.
Explains the control of electronic expansion valves.
Explains timer control functions.
Details compressor operation.
Explains control of expansion valves.
Lists and explains protective functions.
Provides a list of protective functions and their conditions.
Covers abnormal operation conditions and troubleshooting.
Comprehensive list of outdoor unit error codes and their troubleshooting.
Error codes and troubleshooting for simple/wired remote controllers.
Error codes and troubleshooting for group remote controllers.
Steps for troubleshooting when no error code is displayed.
Error codes for external switch controllers.
Error codes for signal amplifiers.
Error codes for network converters.
Error codes for wireless LAN adapters.
Detailed troubleshooting steps for specific error codes.
General troubleshooting procedures.
Troubleshooting outdoor unit errors with specific codes.
Steps for troubleshooting when no error code is displayed.
Troubleshooting steps for optional parts.
Procedures for removing the compressor, including precautions.
Precautions for exchanging refrigerant cycle parts.
To Next Page