En-6
3. Press
.
4. Set each timer operation.
For details, refer to the following instructions of each timer setting.
5. Press
to complete the timer setting.
Be close to the indoor unit.
• To cancel the timer setting during the procedure, press
again.
6.1. Weekly timer
■
Setting details
1. Select Weekly timer in step 2 of “Timer setting procedure”.
2. Press
to select the program number and the
day of the week.
Selected program number (1~4) and the day of the week will blink.
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
3. Press
.
4. Press
to choose the timer operation.
5. Press
.
* When you chose “Without a timer” in step 4, the setting display will
return to step 1.
6. Press
to set on time or o time.
7. Press
.
* When you chose “O timer” in step 4, the setting display will return
to step 1.
8. Press
to set the temperature.
Temperature setting range
Auto, Cooling, or
Dry mode:
18.0 to 30.0 °C
*Even if you set to 10.0, 16.0-17.5 °C, the air
conditioner will run at 18.0 °C.
Heating mode: 10.0 or 16.0 to 30.0 °C
9. Press
.
The setting display will return to step 1.
10. Press
to complete the setting.
Be close to the indoor unit.
NOTES: [
] indicator on the indoor unit will not turn on even if the
setting is complete.
• If you want to return the previous step, press
.
• To check the schedule, use
to browse the Weekly
timer settings in step 1.
To nish checking, press
.
• To deactivate the Weekly timer, press
while is
shown on the remote controller display.
The indicator will disappear.
Day of the week
Program number
(Without a timer)
(On timer) (O timer)
NOTES:
• The operation modes will be the same as the mode at the last time
operation was stopped, so Cooling → Heating → Cooling → Heating
type of operations cannot be set automatically.
• If you set the On timer and O timer on the same time, the On timer
will work.
• If two On timers are set on the same time, the air conditioner will run
in the order of the program number.
• You cannot the Weekly timer and the other timers simultaneously.
If you use the On/O timer, the Program timer, or the Sleep timer
while the Weekly timer is activated, the Weekly timer will be
deactivated.
In such a case, activate the Weekly timer after the other timer
nishes.
• If the wired remote controller (optional) is connected, this function is
restricted.
■
Examples of Weekly timer
Example 1
7:00 9:00 11:00 17:00 23:00
Monday
to Friday
Program
1
Program
2
Program
3
Program
4
On O On O
26 °C 28 °C
Wake up Leave for
work
Come back
home
Go to
sleep
Saturday (No timer settings)
Sunday Program
1
Program
2
Program
3
Program
4
O O O O
(On) (On) (On) (On)
Example 2: You can specify temperature settings using the On timer in
the Weekly timer.
7:00 9:00 17:00 23:00
Program 1 Program 2 Program 3 Program 4
On On On On
28 °C 26 °C 27 °C 28 °C
6.2. On timer or O timer
1. Select On timer or O timer in step 2 of “Timer setting
procedure”.
2. Press
to set on time or o time.
Pressing the button: The time will change by +5/-5 minutes.
Pressing down the button: The time will change by +10/-10 minutes.
• To deactivate the On/O timer, press
while is
shown on the remote controller display.
The indicator will disappear.
6.3. Program timer
1. Set On timer and O timer. (Refer to “6.2. On timer or O
timer”).
2. Select Program timer in step 2 of “Timer setting procedure”.
The timer whose setting time is closer to the current time works rst.
The order of the timer operation is displayed as follows:
Timer Indicator on the remote controller display
On→O timer
O →On timer
NOTES: You can set the Program timer only within a span of 24 hours.
9387858068-01_OM.indb 6 07-Oct-20 14:00:38
To Next Page
Loading...
Need help?
General
