To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu ASYG09LLCE and is the answer not in the manual?
General| Type | Air conditioner indoor unit |
|---|---|
| Multi-split | - |
| Product color | White |
| Inverter technology | Yes |
| Refrigerating medium | R410A |
| Air conditioner functions | Cooling, Dehumidifying, Heating |
| Refrigerating medium weight | 650 g |
| Cooling capacity in watts (nominal) | - W |
| Operating temperature (cooling) (T-T) | -10 - 43 °C |
| Operating temperature (heating) (T-T) | -15 - 24 °C |
| Heating capacity in watts (nominal) (Average heating season) | 3000 W |
| Airflow | 1670 m³/h |
| Outdoor unit noise level | - dB |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Design load (cooling) | - kW |
| Annual energy consumption (cooling) | 127 kWh |
| Hourly energy consumption (cooling) | - kWh |
| Indoor unit type | Wall-mountable |
| Indoor unit depth | 206 mm |
| Indoor unit width | 820 mm |
| Indoor unit height | 262 mm |
| Indoor unit weight | 7000 g |
| Indoor unit noise level (high speed) | 720 dB |
Explains how the compressor frequency is controlled based on room temperature.
Details compressor frequency control based on room temperature for heating.
Specifies conditions for initiating defrost operation.
Outlines conditions for ending defrost operation.
Prevents compressor damage from high discharge gas temperature.
Prevents indoor heat exchanger from freezing in cooling/dry modes.
Stops unit if outdoor heat exchange sensor temperature is too high.
Lists error codes and corresponding flashing patterns for indoor units.
Provides step-by-step troubleshooting for specific error codes.
Guides for diagnosing issues with no error display.
Diagnoses issues related to the indoor unit having no power.
Diagnoses issues related to the outdoor unit having no power.
Guides for diagnosing when the unit is on but not operating.
Diagnoses issues when the unit doesn't cool or heat.
Guides for diagnosing and replacing the compressor.
