Need help?Do you have a question about the Fujitsu ASYG12LLCC and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | ASYG12LLCC |
| Category | Air Conditioner |
| Language | English |
Explains how the sensor perceives room temperature variations to control compressor frequency.
Details compressor frequency control based on room temperature for heating mode.
Describes compressor frequency changes based on detected room temperature variations.
Explains automatic switching between heating, cooling, dry, and monitoring modes.
Covers fan speed settings, airflow modes, and fan operation during cooling auto mode.
Details outdoor fan motor types, speed control based on zone, and defrost operation impact.
Explains vertical and right-left louver adjustments and swing operations.
Details compressor frequency range, start-up control, and limitations by outdoor temperature.
Describes ON timer, OFF timer, and PROGRAM TIMER functionalities for wireless remote control.
Explains how to enter and perform test operation mode for the air conditioner.
Describes the 2-minute 20-second delay before compressor operation after stopping.
Details the 2-minute 20-second delay for the four-way valve switch in heating mode.
Explains automatic system restart after a power outage using memorized settings.
Describes operation using the manual auto button on the indoor unit when remote is lost.
Details the operation controlled when forced cooling is set, regardless of room temperature.
Explains heating the compressor when the outdoor heat exchanger temp is low for 30 mins.
Details the ECONOMY operation functions, offering about 70% of normal operation.
Explains the POWERFUL operation mode for maximum power output of indoor/outdoor units.
Details the conditions for starting and completing defrost operation.
Explains the automatic defrost operation that proceeds when operation stops in heating mode.
Covers discharge gas temperature over-rise and current release control protections.
Lists error codes and corresponding flashing patterns of indoor unit lamps for troubleshooting.
Provides step-by-step troubleshooting for serial communication errors with error codes.
Offers guidance for troubleshooting issues without specific error codes, like no power.
Provides diagnostic methods for compressor issues and related service parts.
Details how to set various functions like filter sign, temperature correction, and auto restart.
Lists resistance and voltage values for room and heat exchanger thermistors at different temperatures.
To Next Page
