Fujitsu AUXG09KVLA Service Instruction

1-2. Heating operation
A sensor (room temperature thermistor) built in indoor unit body will usually perceive difference or
variation between setting temperature and present room temperature, and controls operation fre-
quency of compressor.
• If the room temperature is 6.0 °C lower than a set temperature, the compressor operation frequen-
cy will attain to maximum performance.
• If the room temperature is 1.0 °C higher than a set temperature, the compressor will be stopped.
• When the room temperature is within the range of +1.0°C to -6.0°C of the setting temperature, the
compressor frequency is controlled within the range shown below.
• Compressor frequency range
Unit: rps
Model name Minimum frequency Maximum frequency
ARXG09KLLAP 14 110
ARXG12KLLAP 14 110
ARXG14KLLAP 12 110
ARXG18KLLAP 12 110
• Limit of maximum speed based on outdoor temperature
In heating operation, maximum frequency is defined by outdoor temperature and fan mode.
A zone
12°C
B zone
14°C
C zone
-10°C
-12°C
Outdoor
temperature rises
Outdoor
temperature drops
Unit: rps
Model name
Outdoor
temperature
zone
Indoor unit fan mode
HIGH MED LOW QUIET
ARXG09KLLAP
A zone 110 102 95 89
B zone 110 102 95 89
C zone 110 102 95 89
ARXG12KLLAP
A zone 110 110 110 98
B zone 110 110 110 98
C zone 110 110 110 98
ARXG14KLLAP
A zone 110 110 97 81
B zone 110 110 97 81
C zone 110 110 97 81
ARXG18KLLAP
A zone 110 110 87 74
B zone 110 110 87 74
C zone 110 110 87 74
1-2. Heating operation - (01-3) - 1. Compressor frequency control
CONTROL AND FUNCTIONS CONTROL AND FUNCTIONS

Fujitsu AUXG09KVLA Specifications

General

Brand	Fujitsu
Model	AUXG09KVLA
Category	Air Conditioner
Language	English