Fujitsu D2942 User Manual

Main Menu – System functions
HD-ID
The hard disk ID number is displayed during POST and when the password is requested.
Boot Features – System boot
SystembootBootroutine
Opens the submenu used to select s ystem boot settings for the device.
Boot Features
Item Specific Help POST Errors: [Halt On All Errors]
Fast Boot: [Enabled]
Boot Menu:
[Disabled]
Pauses and displays
SETUP entry or resume
boot prompt if error
occurs on boot. If
disabled, system
always attempts to
boot
POST Diagnostic Screen:
[Enabled]
SM Error Halt: [Disabled]
POST Errors – Aborting system boot
Self-testSystembootBootroutine
Defines whether the system boot process is aborted and the system halted when an error is detected.
Halt On All
Errors
If the self-test detects an error, system boot is aborted after the self-test and the
system is halted. The system boot can b e continued by pressing the F 1 key.
No Halt On
Any Errors
System boot is not aborted . The error will be ignore d, as far as possible.
SM Error Halt
Configures the system behaviour during the self-test if a system monitoring error is ascertained
by the System Monitoring Device (e.g. fan monitoring, temperature monitoring).
Enabled
If the syst
em monitoring device reports a fan error to BIOS, the system boot is
cancelle
d and the system stopped after the self-test.
Disabled
The system boot is not c ancelled if the system monitoring device reports a
miscellaneous error to BIOS. In this case, only an error message is displayed.
Fast Boot – Quick Self-test
can reduce the scope of the self-test and thus accelerate the s tart-up of the system.
Enabled
When the device is switched on, the quick self-test is c arried out, in which e.g. the
floppy disk drives are not checked.
Disabled
When the device is switched o n the complete self-test is carried out.
Fujitsu Technology Solutions 17

Fujitsu D2942 Specifications

General

Brand	Fujitsu
Model	D2942
Category	Motherboard
Language	English