Installing/removing the processor
English - 5
Installing/removing the proc
essor
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating m anual of your system.
Technical data
• Socket LGA 1155, max. 95
W
• A current list of the processors supported by this mainboard is available on the
Internet at: "
http://ts.fujitsu .com/mainboards".
Never touch the underside of the processor. Even minor s oiling such as grease
from the s kin can impair the processor’s operation or destroy the pro cessor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor a s it
may be damaged by doing so. Please con tact the responsible vendor.
Fujitsu Technology Solutions 19
To Next Page
Loading...
