System expansio ns
Do not discard the filler panel. Depending on the desired configuration level, you must
reinstall the filler panel for cooling, protection against fire and in order to comply with EMC
(electromagnetic compatibility) regulations (see ""
Removing a slimline drive", Page 41").
2
b
b
a
a
► Insert the new drive cover into the casing cover from the front. In doing so, m ake
sure that all the inner catches that are present engage (a, b).
► Change the desired drives as required, as described in the corresponding chapt er.
► Fit the casing cover onto the casing again (see chapter "
Reattaching the casing cover.", Page 33).
Fujitsu 37
To Next Page
Loading...
