EasyManua.ls Logo

Fujitsu ESPRIMO D53 Series - User Manual

Fujitsu ESPRIMO D53 Series
39 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
System
Operating Manual
FUJITSU Desktop
ESPRIMO D53x / D73x

Table of Contents

Questions and Answers

  • E
    Eric EsparzaAug 10, 2025
    What to do if the power-on indicator is unlit on my Fujitsu Desktop?
    • B
      Brandon FlemingAug 10, 2025
      If the power-on indicator is unlit after switching on your Fujitsu Desktop, the mains voltage supply could be faulty. Check whether the power cable is properly plugged into the device and a grounded mains outlet. Another cause could be an overloaded internal power supply. To resolve this, pull the power plug out of the mains outlet, wait approximately 3 minutes, plug it back into a grounded outlet, and switch the device on again.
  • B
    Billy CollinsAug 16, 2025
    What to do if my Fujitsu ESPRIMO D53 Desktop can't be switched off with the On/Off switch?
    • A
      Andrew WilliamsAug 16, 2025
      If your Fujitsu Desktop cannot be switched off with the On/Off switch, it may be due to a system crash. Press the On/Off switch for at least 4 seconds until the device switches off. Warning: this could lead to data loss because the operating system will not shut down properly, and error messages may appear the next time the system is booted.
  • J
    Jennifer ThompsonAug 21, 2025
    What to do if no mouse pointer is displayed on Fujitsu ESPRIMO D53 Desktop screen?
    • R
      Rebekah RoweAug 21, 2025
      If no mouse pointer is displayed on your Fujitsu Desktop screen, the mouse may not be correctly connected. Shut down your operating system properly (e.g., using Ctrl + Alt + Del), switch the device off, and check that the mouse cable is properly connected to the system unit. If you're using an adapter or extension lead, check those connections. Ensure only one mouse is connected. Then, switch the device back on. Also, check in the BIOS Setup whether the used USB ports are enabled.
  • N
    Nicholas KennedyAug 26, 2025
    Why is my Fujitsu ESPRIMO D53 Desktop monitor blank?
    • K
      Kimberly JonesAug 26, 2025
      Your Fujitsu Desktop monitor might be blank because it is switched off, so turn it on. Power saving may be activated, in that case, press any key or deactivate the screen saver and enter your password if needed. The brightness control could be set too low, so adjust it. Also, check if the power and monitor cables are properly connected to both the device and the power outlet. If the monitor setting is incorrect, restart the system, press F8 while booting, start in Safe Mode, and set up the monitor as described in your operating system and monitor documentation.
  • L
    Lindsey WebsterAug 30, 2025
    How to fix incorrect time and date on Fujitsu Desktop?
    • S
      Stephanie SampsonAug 30, 2025
      If the time and date are incorrect on your Fujitsu Desktop, set the correct time and date within the operating system or in the BIOS Setup. If the time and date are repeatedly wrong when you switch your device off and then on, change the lithium battery.
  • A
    amy37Sep 5, 2025
    What to do if my Fujitsu ESPRIMO D53 SmartCard reader is not recognized?
    • K
      Kevin BrownSep 5, 2025
      If your Fujitsu Desktop SmartCard reader is not recognized, check that you have inserted your SmartCard correctly, with the chip facing upwards. Also, verify that the SmartCard complies with the ISO standard 7816-1, -2, -3, and -4, and is supported by the reader.

Fujitsu ESPRIMO D53 Series Specifications

General IconGeneral
ProcessorIntel Core i5
StorageSSD or HDD options (capacity varies)
GraphicsIntegrated Intel UHD Graphics or optional dedicated GPU
Operating SystemWindows 10 Pro
Form FactorTower
NetworkGigabit Ethernet, optional Wi-Fi
AudioIntegrated HD audio
LAN10/100/1000 Mbit/s

Related product manuals