Problem solutions and tips
No mouse pointer displayed on the screen
Cause
Remedy
The mouse is not correctly connected.
► Shut d own your operating system in the
proper manner, for instance using
Ctrl
+
Alt
+
Del
.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Make sure that only one mouse is
connected.
► Switch the device on.
Disabled USB ports ► Check in the BIOS Setup whether the used
USB ports are enabled (se e BIOS manual or
manual for the mainboard).
Time and/or date is not correct
Cause
Remedy
Time and date are incorrect.
► Set the correct ti
me and date within the
operating syste
m you are using.
or
► Set the correct time and /or date in the
BIOS Setup.
The lithium battery is empty.
► If the time and
date are repeatedly w ron g
when you switc
h your device off and then
on, change th
e lithium battery (see the
"System exp
ansions and repairs" manual).
SmartCard
reader is not recognised
Cause
Troubleshooting
Chip card inserted incorrectly. ► Check whether you have inserted your
SmartCard into the SmartCard reader the
right w ay with the chip facing upwards.
► Check wh
ether the SmartCard you are u sing
is suppo
rted. Your SmartCard must comply
with the
ISO s tandard 7816-1, -2, -3 and -4.
Fujitsu 29
To Next Page
Loading...
