Getting started
Getting started
Gettingstarted
Please observe the safety information in the "I mportant notes", Page 7 chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be
required for reshipment at some later dat e.
PackagingContentsofdeliv eryPackaging,
► Unpack all the individual p arts.
► Check the contents of the package for any visible damage caused during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Steps for initial setup
Preparingforfi rstuse, overviewPreparingforu se,
Only a few steps are necessary to put your new device into operation for the first time:
• Select a location for device and set up device
• Connect external devices such as mouse, keyboard and monitor
• Check the voltage at the m ains outlet and connect the device to an electrical outlet
• Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other external devices in addition to your own device (e.g.
a printer), do not connect the se until after the initial installation. The f ollowing
sections describe how to connect these external devices.
Drives and b oard s
If you have received drives or boards as well as your device, please do not
install them until after first-time setup. Installation of drives and boards is
described in the "System expansions and repairs" manual.
12 Fujitsu
To Next Page
Loading...
