Fujitsu KVM s4-1622 - User Manual

Quick Installation Guide
Fujitsu Technology Solutions GmbH, User Documentation, 33106 Paderborn, Germany • Email - manuals@ts.fujitsu.com l Online - http://ts.fujitsu.com/support
All hardware and software names used are trademarks of their respective manufacturers. 590-1057-640A
installation
4
KVM s4 Switch
KVM s4-0812
|
KVM s4-1622
|
KVM s4-3242
The following instructions will help you install
and use your switch easily.
Should you require further assistance, please
consult your installer/user guide.
1
Connecting the local port
Connect your VGA monitor and USB keyboard and
mouse cables into the appropriate ports on the KVM
s4 switch.
2
Connecting a CAT 5 adapter cable to
the KVM s4 switch
Connect one end of a CAT 5 cable (4-pair, up to 150 ft/45 m)
into an available numbered port on the rear of
your switch. Connect the other end into the RJ-45
connector of the CAT 5 adapter cable.
3
Connecting a target device to a CAT
5 adapter cable
Connect a CAT 5 adapter cable into the appropriate
port on the back of a target device. Repeat steps 2
and 3 for all target devices you want to connect.
4
Connecting network users
Connect a customer supplied CAT 5 cable from the
Ethernet network into a LAN port on the back of
the switch. Network users will access the switch
through this port.
5
Connecting to an external modem
(optional)
The switch may also be accessed using an ITU V.92,
V.90 or V.24-compatible modem. Connect one end of
a CAT 5 cable into the MODEM port on the switch.
Connect the other end into the CAT 5 to DB-9 (male)
adapter, which then connects into the appropriate
port on the back of the modem.
KVM s4 switch conguration
Telephone
network
Target
devices
2
1
KVM s4 Switch
(KVM s4-3242 shown)
Ethernet
Modem
CAT 5
Adapters
3
4
Local USB Connections

Fujitsu KVM s4-1622 Specifications

General

Brand	Fujitsu
Model	KVM s4-1622
Category	Switch
Language	English

Summary

KVM s4 Switch Installation Steps

Connecting the Local Port

Connect VGA monitor, keyboard, and mouse to the switch's local ports.

Connecting CAT 5 Adapter Cable to KVM s4 Switch

Connect CAT 5 cable from switch to RJ-45 connector of CAT 5 adapter cable.

Connecting Target Device to CAT 5 Adapter Cable

Connect CAT 5 adapter cable to target device. Repeat for all devices.

Connecting Network Users

Connect Ethernet network via LAN port for remote user access.

Connecting External Modem (Optional)

Connect via modem using CAT 5 cable and DB-9 adapter for remote access.

Connecting Supported PDU (Optional)

Connect PDU to switch via RJ-45, then target device power cords to PDU.

Connecting Local Virtual Media or Smart Cards (Optional)

Connect virtual media/smart card readers to USB ports.

Powering On and Connecting Switch Power

Turn on devices and connect power cords to the switch for redundant power.

Safety and Precautions

General Safety Precautions

General warnings about electrical hazards, storms, grounding, and handling cables.

Connection and Disconnection Procedures

Step-by-step instructions for connecting and disconnecting cables safely.

Rack-Mounting Safety Instructions

Considerations for safe rack installation like ambient temperature and airflow.

Rack Installation

Vertical Rack Mounting

Instructions for mounting the switch vertically using brackets and screws.

Horizontal Rack Mounting

Instructions for mounting the switch horizontally in a 1-U rack space.

Safety, EMC, and Environmental Approvals

Details on safety, EMC, and environmental certifications and markings.