What to do if my Fujitsu Laptop cannot be started?
If your Fujitsu Laptop cannot be started, verify that the power adapter is properly connected. Then, switch the notebook on. Also ensure the battery is correctly installed in its compartment and charged, or insert a charged battery.
How to fix 'System CMOS checksum bad' error on Fujitsu Laptop?
If you encounter the error message 'System CMOS checksum bad - default configuration used' on your Fujitsu Laptop, switch the notebook off and then on again. Press the F2 function key to access the BIOS Setup. In the BIOS Setup, select the Exit menu, choose 'Load Setup Defaults', and then select OK and press Enter.
Why radio connection to network does not work on Fujitsu LIFEBOOK AH502 Laptop?
If the radio connection to a network on your Fujitsu Laptop does not work, switch the radio component on (see "Switching the wireless components on and off", Page 39). If the wireless component is enabled but the wireless connection still doesn't work, check whether the radio connection is switched on via the software. Further information on using the radio component can be found in the help files.
How to fix 'Keyboard controller error' on Fujitsu Laptop?
If you encounter the error message 'Keyboard controller error' on your Fujitsu Laptop, switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch it on again.
How to fix 'Operating system not found' error on Fujitsu Laptop?
If your Fujitsu Laptop displays the error message 'Operating system not found', check in the BIOS Setup to ensure that your hard disk has been set correctly and verify that the operating system is installed on the corresponding drive.
Why is my Fujitsu Laptop not printing?
If the printer is not printing, make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). Check that the data cable connecting the notebook to the printer is properly connected. Also, verify whether the correct printer driver is loaded (refer to the printer documentation).
How to troubleshoot 'Extended memory failed' on Fujitsu LIFEBOOK AH502 Laptop?
If you receive the error message 'Extended memory failed at offset: xxxx Failing Bits: zzzz zzzz' on your Fujitsu Laptop, check whether the additional memory module has been inserted correctly.
How to resolve 'Failure Fixed Disk n' error on Fujitsu LIFEBOOK AH502?
If you encounter the error message 'Failure Fixed Disk n' on your Fujitsu Laptop, start the BIOS Setup (Primary Master submenu) and select the correct settings.
What to do if my Fujitsu Laptop suddenly stops working?
Provides information on device drivers and software, and liability for other operating systems.
Explains symbols and text formatting used in the manual to convey warnings, important information, and commands.
Details essential safety information and precautions to be followed when working with the notebook.
Provides specific safety guidelines for using wireless components like WLAN and Bluetooth.
Offers advice on preparing for travel, backing up data, and using the notebook during flights or in other countries.
Provides instructions on how to safely clean the notebook's exterior and screen.
Guides users through unpacking the notebook and checking for any transportation damage.
Details how to connect the mains adapter and power cable to the notebook and power outlet.
Explains the meaning of various status indicators on the notebook for power, battery, and drives.
Provides instructions on how to properly shut down the notebook to prevent data loss.
Lists and explains various function key combinations for controlling notebook features.
Describes the touchpad, its buttons, and how to use them for cursor control and selection.
Explains how to execute commands using the touchpad, usually by double-tapping.
Discusses the LCD screen's background lighting and how its luminosity can be adjusted.
Explains how the notebook operates on its built-in battery and how to extend battery life.
Provides guidelines for storing the battery pack at appropriate temperatures to minimize self-discharge.
Describes the optical drive, including laser classification and handling of data carriers.
Explains the procedure for inserting and removing data carriers (CDs/DVDs) from the optical drive.
Lists the memory card formats supported by the notebook, such as SDHC and SDXC.
Details the process of inserting and securing an ExpressCard into its slot.
Provides information on the location and function of the notebook's built-in speakers and microphone.
Explains how to enable or disable the notebook's wireless communication modules.
Describes how to use the Kensington Lock mechanism to protect the notebook from theft.
Details how to set supervisor and user passwords to secure access to the BIOS Setup Utility.
Explains the procedure for removing existing supervisor or user passwords from the BIOS Setup Utility.
Guides users on how to enable password protection for the notebook's hard disk drive.
Outlines the general steps for connecting and disconnecting external devices to the notebook.
Describes how to connect external devices like TVs or amplifiers using the HDMI port.
Explains the safe procedure for disconnecting USB devices to prevent data loss.
Details how to connect an external microphone or audio input devices.
Provides essential notes on handling components, including ESD precautions and safety advice.
Guides users through the process of installing and removing memory modules, including safety precautions.
Details the steps for carefully removing memory modules from the notebook's slots.
Explains how to reattach and secure the notebook's cover after component installation.
Provides instructions on removing the access cover to reach internal components like the hard disk.
Outlines the final steps to prepare the notebook for operation after component replacement.
Explains how to access the BIOS Setup Utility by pressing the F2 key during system startup.
Guides users on navigating and making changes within the BIOS Setup Utility interface.
Describes how to save BIOS settings and shut down the notebook.
Provides guidance on what to do when encountering unresolved computer problems and contacting support.
Offers solutions for issues where the notebook's date or time settings are incorrect.
Provides troubleshooting steps for when the notebook's LCD screen is hard to view.
Offers solutions for situations where the notebook unexpectedly stops functioning or freezes.
Troubleshoots issues with wireless network connectivity, including disabled components or software problems.
Specifies the operating and transportation temperature ranges for the notebook.
Provides technical specifications for the notebook's rechargeable battery, including voltage and capacity.
Explains the Energy Star certification and its implications for power management and environmental impact.
Includes general regulatory notices and information regarding FCC approval for devices without radio components.
Provides specific technical specifications and notices for connecting the device to the Canadian telephone network.
Details compliance with FCC regulations regarding radio frequency exposure limits and safe usage distances.
Informs users about export restrictions related to encryption code and compliance with US and Canadian regulations.
To Next Page
General