5
Drive0 Selects the Drive0
Serial ATA drive
submenu
The product
number of the hard
drive.
Display the type of device on this ATA/IDE interface. Pressing the
Enter key selects the Serial ATA Drive0 submenu allowing additional
device configuration options for this interface.
Drive1: Selects the Drive1
Serial ATA drive
submenu
The product
number of the CD-
ROM drive.
Display the type of device on this ATA/IDE interface, if there is one.
Pressing the Enter key selects the Serial ATA Drive1 submenu allow-
ing additional device configuration options for this interface.
Language:
■
English (US)
■
Japanese (JP)
[English (US)] The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description
Main Menu
To Next Page
Loading...
