What to do if Fujitsu Notebook pc shows 'Extended memory failed at offset'?
If your Fujitsu Notebook PC displays 'Extended memory failed at offset', check whether the additional memory module has been inserted correctly.
What to do if Fujitsu Laptop does not turn on when installed in the optional Port Replicator?
If your Fujitsu Laptop does not turn on when installed in the optional Port Replicator, ensure that the Port Replicator AC adapter is plugged in to provide power. Also, remove and re-dock your LIFEBOOK notebook to ensure it is properly seated in the port replicator.
Why is the display dark when on battery power on Fujitsu Laptop?
If the display is dark when your Fujitsu Laptop is on battery power, press [Fn] + [F7] to increase brightness or double-click on the battery gauge and adjust Power Control under battery settings.
What to do if external keyboard or mouse does not seem to work on Fujitsu LifeBook E752?
If an external keyboard or mouse does not seem to work on your Fujitsu Laptop, reinstall your device. Also, check your device and operating system documentation and activate the proper driver.
Why Fujitsu Notebook pc cannot be started?
Your Fujitsu Notebook PC might not start due to several reasons: * The battery might not be installed correctly. Ensure it is properly placed in its compartment. * The battery might be dead. Try charging it, inserting a charged battery, or connecting the mains adapter. * The power adapter might not be connected correctly. Verify its connection to the notebook.
What to do if Fujitsu Notebook pc shows 'Failure Fixed Disk n'?
If your Fujitsu Notebook PC displays 'Failure Fixed Disk n', start the BIOS Setup (Primary Master submenu) and select the correct settings.
What to do if Fujitsu Notebook pc shows 'Operating system not found'?
If your Fujitsu Notebook PC displays 'Operating system not found', check in the BIOS Setup to ensure your hard disk has been set correctly and that the operating system is installed on the corresponding drive.
What to do if Fujitsu Notebook pc shows 'System CMOS checksum bad'?
If your Fujitsu Notebook PC shows 'System CMOS checksum bad', switch the notebook off and then on again. Press the F2 key to enter BIOS Setup, select the Exit menu, choose 'Load Setup Defaults', and then select OK.
How to fix incorrect date or time on Fujitsu Notebook pc?
You can correct the date and time on your Fujitsu Notebook PC through the BIOS-Setup-Utility, where you can set the date and time in the main menu. If the issue persists, further assistance is needed.
What to do if external monitor remains blank with Fujitsu Notebook pc?
If your external monitor remains blank when connected to your Fujitsu Notebook PC, consider these possible causes and solutions: 1. The monitor might be switched off. Ensure the external monitor is powered on. 2. Power saving might be activated. Press any key to continue. 3. The brightness might be set too low. Adjust the brightness of the monitor. 4. The screen output might be set to the notebook's LCD screen. 5. The power or data cables may be improperly connected. Turn off both the monitor and notebook, check the cable connections, and then turn them back on.
General| Display | 15.6-inch, 1366 x 768 pixels |
|---|---|
| Graphics | Intel HD Graphics 4000 |
| Weight | 2.5 kg |
| RAM | 4 GB DDR3 |
| Storage | 500 GB HDD |
| Operating System | Windows 7 Professional |
| Battery | 6-cell |
| Ports | HDMI, VGA, Ethernet, Audio in/out |
| Wireless | Bluetooth 4.0 |
Provides an overview of the LIFEBOOK E752 notebook and its manual.
Details how to contact Fujitsu for service and support, including phone and website.
Introduces the components of the Fujitsu LIFEBOOK E752 notebook.
Identifies and describes the location of all controls and connectors on the notebook.
Explains the meaning of the status indicators and LEDs on the notebook.
Details the layout and functions of the LIFEBOOK notebook keyboard.
Explains how to use the touchpad, including clicking, dragging, and scrolling.
Describes the security features and application launch capabilities of the panel.
Details the notebook's power sources: battery, AC adapter, and optional auto/airline adapter.
Covers opening and adjusting the brightness of the LIFEBOOK display panel.
Guides users through powering on the notebook and the initial boot sequence.
Explains options for conserving battery power and managing system power settings.
Provides a procedure to identify and resolve common notebook problems.
Guides users on saving and restoring system images and software.
Explains how to get the latest drivers and software from Fujitsu's support site.
Offers tips for maintaining the notebook's longevity and reliability.
Provides instructions for cleaning the notebook's exterior, keyboard, and LCD display.
Details how to care for and maintain the notebook's batteries.
Lists the hardware and environmental specifications for the LIFEBOOK notebook.
Describes all available device ports on the notebook and port replicator.
Outlines operating and storage temperature and humidity requirements.
Lists the software applications pre-installed on the notebook.
Provides essential information before setting up and using the wireless LAN device.
Guides users on how to configure the wireless LAN connection using Windows.
Offers solutions for common problems encountered with the wireless LAN.
Lists the technical specifications for the integrated wireless LAN device.
Introduces the optional fingerprint sensor and its benefits for system security.
Guides users through the process of enrolling a user and their fingerprint.
Explains how to use OmniPass for simplifying user authentication procedures.
Details how to manage passwords and identities within the OmniPass application.
Provides solutions for common issues encountered with adding Windows users or using OmniPass.
To Next Page
