77
- Memory Upgrade Module
Figure 26. Inserting a Memory Upgrade Module
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change as follows:
• If you are in Control Panel Category view, check the memory capacity by clicking [Start] -> Control Panel ->
System and Security -> System -> View amount of RAM and processor speed. The amount of memory is
displayed next to “Memory - RAM:”
• If you are in one of the icon views, check the memory capacity by clicking [Start] -> Control Panel -> System.
The amount of memory is displayed next to “Memory - RAM:”.
IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED. (IF THE MODULE IS
PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 86
.
)
To Next Page
Loading...
