90
- Troubleshooting
LIFEBOOK notebook fails to
recognize Blu-ray/DVD/CD-
RW/CD-ROM’s. (continued)
The disc is dirty or defective. Wipe the disc with a non-abrasive CD cleaning cloth and reinsert. It if still will
not work try another disc in the drive.
The drive access indicator
on the Status Indicator
Panel blinks at regular inter-
vals with no disc in the tray
or the drive is not installed.
The Windows auto insertion
function is active and is
checking to see if a disc is
ready to run.
This is normal. However, you may disable this feature.
Port Replicator Problems
Note: Be sure to power down your LIFEBOOK notebook before adding a printer to the Port Replicator parallel port.
Notebook does not turn on
when installed in the
optional Port Replicator
Port Replicator AC adapter is
not plugged in.
Provide power to the Port Replicator.
Notebook is not properly
seated in port replicator.
Remove and re-dock your LIFEBOOK notebook.
Hard Drive Problems
You cannot access your
hard drive.
The wrong drive designator
was used by an application
when a bootable disc was
used to start the notebook.
Verify drive designator used by application is in use by the operating system.
When the operating system is booted from a CD, drive designations are auto-
matically adjusted.
Security is set so your OS
cannot be started without a
password.
Verify your password and security settings.
Keyboard or Mouse Problems
The built-in keyboard does
not seem to work.
The notebook has gone into
Sleep mode.
Push the Power/Suspend/Resume button.
The application has locked
out the keyboard.
Try to use your integrated pointing device to restart your system.
Problem Possible Cause Possible Solutions
To Next Page
Loading...
