81
- Device Ports
External Video Port
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator. In order to
connect your notebook to this device, follow the instructions that are included in “Port Replicator” on page 82.
The external video port allows you to connect an external monitor or
LCD projector. In order to connect an external video device, follow
these easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
3 Tighten the two hold-down screws, located on each end of the
connector.
Figure 31. Connecting External Video Device
To Next Page
Loading...
