Connecting external de vices
Connecting an external monitor
An analog mo nitor is connected to the analog external monitor port (VGA), a digital
monitor to the Display Port or to the DVI-D monitor port on the optio nal port replicator.
The display output is limited t o a maximum of two monitors at any one time (see "
Key
combinations", Page 27, s ection "Toggle display output").
MonitorVGA socketMonito rportMonitorp ort
Digital Display Port (on notebo ok or on optional
port replicator)
Analog external monitor port (VGA) (on
notebook or on optional port replicator)
Digital DVI-D monitor port (on optional port
replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the noteboo k.
You can also switch back and forth between the external monitor and the LCD
screen of the notebook, see ch apter "
Key combination s", Page 27.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
If you wish to operate the screen via a DVI port, use the port replicator
which is available as an option for your notebook.
Fujitsu 55
To Next Page
Loading...