Removing and installing components
during servicing
Removing and installing the har
ddisk
Removing the cover
1
2
► Rem o ve the screw (1).
Keep the screws in a safe place. If you are removing m ore than one component at
the sa me time, store the screws for the individual componen ts separate from each
other. If you install the wrong screws, co mponents may be damaged.
The screw s are not all the same length and when the cover is installed,
the correct screws must be used.
► Lift the cover off the notebook (2).
Fujitsu 65
To Next Page
Loading...